Paket Leak Detector

Acoustical Leak Detector

XLT-30 by Fisher Research

Detects and pinpoints liquid leaks in pipes.

Description

The Fisher XLT-30 takes leak detection to a new level with advanced electronic amplification and filtering. An all-tactile keypad along with an easy to read digital display enables even the novice to become proficient at leak detection.

The advanced microprocessor enables ENHANCEMENT of the weakest sounds like those in non-metallic pipes or those in sound muffling conditions. The XLT-30 is also designed to reject most loud interfering noises like wind, motors, and traffic.

New to the filtering selection is a Notch feature that allows independent suppression of an outside interfering sound, allowing the user to selectively tune to the desired leak noise.

In the Fisher tradition, the XLT-30 is affordable, tough, and simple to use while providing maximum performance. A two-year limited warranty comes standard with the unit.

Features

Detects and pinpoints liquid leaks in pipes.
Notch filter for external noise suppression.
Ultra low amplifier noise.
Peak hold feature on LCD bar-graph for sound comparison.
Automatic limiter system to enhance weak noise sources.
Shielded sensor for reduced response to outside noise.
Improved headset for clearer sound response.
Tactile keypad & digital display, backlit for low light usage.
Increased response in poor sound conductors.
Automatic battery test and monitoring.
Operates on two 9 Volt batteries.

XLT-30 Specifications

Specifications subject to change without notice.

Operating Frequency:

All-pass mode: 60 Hz – 60 kHz

Filter mode: 60 Hz – 2.4 kHz
Filter Types:
Independent notch filter

Lowpass, highpass, or bandpass
Gain: 95 dBOutput Indications:
Audio: High-performance headphones

(64 ohms)

Visual: LCD bargraph and 2-digit numeric displayPower:
Batteries: 2 ea. 9 Volt alkaline

Battery Test: Automatic

Battery Life: 50 hrs (approx.)

Weight:

Housing: 1.2 lbs
Bigfoot Sensor: 4.5 lbsCase Dimensions: 8-¼” x 8-½” x 32-½”

Accessories

Standard Equipment:

Hard carrying case

Operation manual
Optional Equipment:
Little Foot Assembly

Metal Detector

Valve & Box Locator Metal Detector

M-66 by Fisher Research

Finds buried or paved-over valves, boxes, vaults, survey markers,
water or gas meters, conduit, or other metal objects

Description

Fisher’s M-66 Valve and Box Locator is designed specially for finding buried or paved over valves, boxes or vaults. In addition, the M-66 locates survey markers, water or gas meters, conduit, manholes and any other concealed metallic objects. The M-66 detects all metals including aluminum, brass, copper, iron, nickel, steel or tin.

Combining sensitivity and accuracy with maximum ground penetration, the M-66 eliminates any guesswork when pinpointing hidden metallic objects. The electronic balance of the M-66 is easily and quickly tuned for detection within seconds, while also allowing for maximum audio and visual indications.

In the Fisher tradition, the M-66 is affordable, tough, and simple to use while providing maximum performance. A two-year limited warranty comes standard with the unit.

Features

Simple operation – only 2 knobs.
UItra-sensitivity and maximum penetration through soil, asphalt or concrete.
Ground rejection VLF (very low frequency) eliminates false signals.
Detects all metals.
Built-in battery test.
Analog meter and audio target signal.
Adjustable shaft.
Fully submersible 8-inch search coil.
Weather resistant design.

M-66 Specifications
Search Loop Configuration: Double D (direct wired) Loop Output Frequency: 4.5 kHz Output Indication: Speaker: 16 ohm impedance Audio frequency: 450 Hz Power Supply: 9V, each Power Consumption: (-9V): 17 mA (+9V): 4 mA min, 6 mA sound threshold, 125 mA max sound	Weight: 4.25 lbs with 8″ coil Operating Temperature: -4°F to +158°F (-20°C to +70°C) Search loop immersible in water Dimensions: Length 28″ to 48″ (71 cm to 122 cm), adjustable Shipping Weight: 7 lbs Shipping Dimensions: 34.75” x 12.75″ x 5.25″ (88.3 x 32.4 x 13.3cm)

2-Year Warranty

Fisher warrants the M-66 to be free of defects in material and workmanship when it is shipped from the factory. The terms of this warranty are fully explained in a warranty registration card that accompanies the instrument. Complete factory and field service facilities support the warranty. Warranty may vary outside the U.S. Please see Corrosion

Control Products Company for details.

Valve, Pedestal, Box Locator

M-97 Metal Detector

By Fisher Research

Designed for finding buried or paved-over valves, boxes,
manhole covers, or any other concealed metallic object.

Description

The Fisher M-97 is specially designed for finding buried or paved over valves, boxes, or manhole covers, or any other concealed metallic object. It also locates targets made of aluminum, brass and lead.

The M-97 features pushbutton tuning, allowing the user to quickly and easily maintain optimum sensitivity for easy pinpointing of buried metallic objects. Plus, the M-97 offers auto-tune circuitry and a waterproof search coil.

New to the M series is the ease with which the M-97 can be stored. Just compact the lower stem, twist the search coil 90 degrees, and fold the search coil flat. The M-97 fits easily into the optional carrying case.

In the Fisher tradition, the M-97 is affordable, tough, and simple to use while providing maximum performance. A two-year limited warranty comes standard with the unit.

Features

Two knobs and a pushbutton for simple operation.

Adjustable shaft with double locking stem.

Ground Effect Rejection VLF eliminates annoying or false signals from wet ground foliage, pavement or mineralized ground.

High sensitivity for maximum penetration through soil, asphalt or concrete.

Built-in Battery Test/Pushbutton Tuning.

Ultra Slow Auto-Tune to stabilize ground tuning and minimize frequency drift.

Identifies metallic objects by speaker sound and needle movement.

Compact size for convenient storage.

M-97 Specifications

Search coil:
Frequency: 4.5 kHz
Configuration: Double-D

Sensitivity:
For full scale: 0.20 mV RMS
Adjustment range: 12:1

Output Indication:
Meter: 1 mA, 0-100 linear scale
Speaker: 16-ohrn impedance
Headset (optional): 8-ohm impedance
Audio Frequency: 450 Hz

Power:
Batteries: 2 ea 9V alkaline batteries
Battery Life: 15-25 hours
Power Consumption: (-9V) 13.8 mA
At min sound: 8 mA
At max sound: 50 mA
At audio threshold: 17.5 to 18.5 mA

Weight:
With 8-inch search coil: 3.3 lbs (1.5 kg)
With 11-inch search coil: 3.9 lbs (1.8 kg)

Dimensions:
Length: adjustable 38”-50” (96-127 cm)
Shipping: 6″ x 13″ x 35″ (15 x 33 x 82 cm)

Optional Accessories

Hard carrying case

Vinyl carrying bag

Headphones

Coil Covers

11″ search coil

Leak Detector & Metal Detector

Acoustical Leak Detector

XLT-30 by Fisher Research

The Fisher XLT-30 takes leak detection to a new level with advanced electronic amplification and filtering. An all-tactile keypad along with an easy to read digital display enables even the novice to become proficient at leak detection.

The advanced microprocessor enables ENHANCEMENT of the weakest sounds like those in non-metallic pipes or those in sound muffling conditions. The XLT-30 is also designed to reject most loud interfering noises like wind, motors, and traffic.

New to the filtering selection is a Notch feature that allows independent suppression of an outside interfering sound, allowing the user to selectively tune to the desired leak noise.

In the Fisher tradition, the XLT-30 is affordable, tough, and simple to use while providing maximum performance. A two-year limited warranty comes standard with the unit.

Detects and pinpoints liquid leaks in pipes.

Notch filter for external noise suppression.

Ultra low amplifier noise.

Peak hold feature on LCD bar-graph for sound comparison.

Automatic limiter system to enhance weak noise sources.

Shielded sensor for reduced response to outside noise.

Improved headset for clearer sound response.

Tactile keypad & digital display, backlit for low light usage.

Increased response in poor sound conductors.

Automatic battery test and monitoring.

Operates on two 9 Volt batteries.

Operating Frequency:

All-pass mode: 60 Hz – 60 kHz

Filter mode: 60 Hz – 2.4 kHz

Filter Types:

Independent notch filter

Lowpass, highpass, or bandpass

Gain: 95 dBOutput Indications:

Audio: High-performance headphones

(64 ohms)

Visual: LCD bargraph and 2-digit numeric displayPower:

Batteries: 2 ea. 9 Volt alkaline

Battery Test: Automatic

Battery Life: 50 hrs (approx.)

Weight:

Housing: 1.2 lbs

Bigfoot Sensor: 4.5 lbsCase Dimensions: 8-¼” x 8-½” x 32-½”

Standard Equipment:

Hard carrying case

Operation manual

Optional Equipment:

Little Foot Assembly

Leak Detector & Metal Detector

Acoustical Leak Detector

XLT-30 by Fisher Research

The Fisher XLT-30 takes leak detection to a new level with advanced electronic amplification and filtering. An all-tactile keypad along with an easy to read digital display enables even the novice to become proficient at leak detection.

The advanced microprocessor enables ENHANCEMENT of the weakest sounds like those in non-metallic pipes or those in sound muffling conditions. The XLT-30 is also designed to reject most loud interfering noises like wind, motors, and traffic.

New to the filtering selection is a Notch feature that allows independent suppression of an outside interfering sound, allowing the user to selectively tune to the desired leak noise.

In the Fisher tradition, the XLT-30 is affordable, tough, and simple to use while providing maximum performance. A two-year limited war­ranty comes standard with the unit.

Detects and pinpoints liquid leaks in pipes.

Notch filter for external noise suppression.

Ultra low amplifier noise.

Peak hold feature on LCD bar-graph for sound comparison.

Automatic limiter system to enhance weak noise sources.

Shielded sensor for reduced response to outside noise.

Improved headset for clearer sound response.

Tactile keypad & digital display, backlit for low light usage.

Increased response in poor sound conductors.

Automatic battery test and monitoring.

Operates on two 9 Volt batteries.

Operating Frequency:

All-pass mode: 60 Hz – 60 kHz

Filter mode: 60 Hz – 2.4 kHz

Filter Types:

Independent notch filter

Lowpass, highpass, or bandpass

Gain: 95 dBOutput Indications:

Audio: High-performance headphones

(64 ohms)

Visual: LCD bargraph and 2-digit numeric displayPower:

Batteries: 2 ea. 9 Volt alkaline

Battery Test: Automatic

Battery Life: 50 hrs (approx.)

Weight:

Housing: 1.2 lbs

Bigfoot Sensor: 4.5 lbsCase Dimensions: 8-¼” x 8-½” x 32-½”

Standard Equipment:

Hard carrying case

Operation manual

Optional Equipment:

Little Foot Assembly

In the Fisher tradition, the XLT-30 is affordable, tough, and simple to use while providing maximum performance. A two-year limited warranty comes standard with the unit.